Volvo XC90: Activating and deactivating Eco drive mode using the function button - STARTING AND DRIVINGVolvo XC90: Activating and deactivating Eco drive mode using the function button

There is a function button for Eco drive mode in the center display's Function view if the vehicle is not equipped with a drive mode control in the tunnel console.

When the engine is switched off, Eco mode is deactivated and must therefore be reactivated each time the engine is started. ECO will be displayed in the instrument panel when the function is activated.

Selecting Eco drive mode in the center display's Function view

Tap the Driving Mode ECO button to activate or deactivate the function.

Volvo XC90. Activating and deactivating Eco drive mode using the function button

An indicator light in the button will illuminate when the function is activated.

Eco drive mode
Eco drive mode can help make driving more fuel-efficient and eco-friendly. Use this mode to save fuel and promote ecofriendly driving. When Eco mode is activated, the following characteristics are modified: ...

Start/Stop function
Start/Stop is a function that temporarily switches off the engine when the vehicle has stopped, e.g. at a traffic light or in heavy traffic, and then starts it again automatically when needed. The Start/Stop ...

See also:

Seat Belt Warning Light
This warning light informs the driver that the seat belt is not fastened. For more details, refer to the “Seat Belts” in chapter 3. ...

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is securely ...

Turn Signal Lamp. Repair procedures
Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror holder (A) from the outside mirror assembly. Be careful not to damage the fixing clip 3. Remove ...