Volvo XC90: Activating and deactivating power front seats - CLIMATE CONTROLVolvo XC90: Activating and deactivating power front seats

(Option/accessory)

The seats can be heated for added comfort for the driver and passengers in cold weather.

  1. Volvo XC90. Activating and deactivating power front seats Tap the left- or right-side steering wheel and seat button in the center display's climate bar to open the controls for steering wheel and seat heating.
    • If the vehicle is not equipped with ventilated seats or heated steering wheel (for the driver's side), the button for seat heating is directly accessible in the climate bar.
  2. Volvo XC90. Activating and deactivating power front seats Tap the seat heating button repeatedly to select one of the four levels: Off, High, Medium or Low.
    • The level is changed and the set level is displayed in the button.

WARNING

Heated seats should not be used by people who have difficulty detecting temperature increases due to nerve damage or numbness or who for another reason may have difficulty operating the controls for seat heating.

Climate system controls
The climate system functions are controlled from physical buttons on the center console, the center display, and the climate panel on the rear side of the tunnel console*. Physical buttons in the center ...

Activating and deactivating the heated front seat
(Option/accessory) The seats can be heated for added comfort for the driver and passengers in cold weather. Seat heating can be set to automatically activate when the engine is started. When set to automatically ...

See also:

Pilot Assist symbols and messages
(Option/accessory.) (Depending on market, this function can be either standard or optional.) A number of symbols and messages relating to Pilot Assist may be displayed in the instrument panel and/or the ...

Light ON Indicator Light
This indicator light illuminates: • When the tail lights or headlights are on. ...

4WD ECU. Repair procedures
Replacement 1. Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing with the GDS tool. 2. Disconnect the battery negative cable from the battery 3. Disconnect the 4WD ECU connector (A). ...