Volvo XC90: Adjusting front seat lumbar support
(Option/accessory)
Use the control on the side of the seat cushion to adjust the lumbar support.
Multifunction control, in vehicles with four-way lumbar support*.
Control in vehicles with two-way lumbar support*.
Lumbar support is adjusted using the multifunction control in vehicles with four-way lumbar support*, or the round button in vehicles with two-way lumbar support*. The control is located on the side of the seat cushion. Depending on the selected equipment level, the lumbar support can be adjusted forward/rearward and up/down (four-way lumbar support) or forward/backward (two-way lumbar support).
Adjusting lumbar support in vehicles with four-way lumbar support
- Activate the multifunction control by turning the control
upward/downward. The seat settings
view will appear in the center display. - Select Lumbar in the seat settings view.
- Press the round button up
/down
to move the lumbar support
upward/downward. - Press the front part
of
the button to increase lumbar support. - Press the rear part
of
the button to decrease lumbar support.
- Press the round button up
Adjusting lumbar support in vehicles with two-way lumbar support
- Press the front part
of the
round button to increase lumbar support. - Press the rear part
of the
round button to decrease lumbar support.
* Option/accessory.
Adjusting front seat side bolster settings
(Option/accessory) Enhance comfort in the front seat by adjusting the sides of the backrest. The multifunction control is located on the side of the seat cushion. The side bolsters in the front seat backrests ...
Adjusting the passenger seat from the driver's seat
(Option/accessory) The front passenger seat can be adjusted from the driver's seat. Activating the function The function is activated via the function view in the center display: Tap the Adjust Passenger ...
See also:
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
Oil hydraulic Motor(Actuator). Schematic Diagrams
Circuit Diagram ...
Using the steering wheel paddles to shift
(Option/accessory.) The steering wheel paddles are a supplement to the gear selector and make it possible to shift manually without removing your hands from the steering wheel. The function is available ...