Hyundai Santa Fe: Battery saver function - Lighting - Features of your vehicle - Hyundai Santa Fe DM 2013-2019 Owner's ManualHyundai Santa Fe: Battery saver function

  • The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key (smart key : turns off the engine) and opens the driver-side door.
  • With this feature, the parking lights will be turned off automatically if the driver parks on the side of road at night.

If necessary, to keep the lights on when the ignition key is removed (smart key : turns off the engine), perform the following:

1) Open the driver-side door.
2) Turn the parking lights OFF and ON again using the light switch on the steering column.

    Lighting
    ...

    Headlamp delay
    If you turn the ignition switch to the ACC or OFF position with the headlights ON, the headlights remain on for about 5 minutes. However, if the driver’s door is opened and closed, the headlights ...

    See also:

    Rear Combination Lamp. Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the screws (2EA) holding the rear combination lamp then disconnect the c ...

    Pressure Sensor. Repair procedures
    Inspection If you have trouble code related to the pressure sensor check pressure sensor according to the inspection process. ...

    ATF Warmer. Components and Components Location
    Component Location 1. ATF Warmar 2. Bypass valve 3. ATF hose&pipe 4. Coolant hose&pipe Component 1. ATF Warmar 2. By ...