Hyundai Santa Fe: BlueLink Control Switch. Components and Components Location - MTS System - Body Electrical SystemHyundai Santa Fe: BlueLink Control Switch. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Body Electrical System / MTS System / BlueLink Control Switch. Components and Components Location

Components


Telemetics Unit (TMU). Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. 3. Disconnect the cables and connector (A) from the MTS unit. [Audio type] [AVN type] 4. Remove the MTS unit after ...

BlueLink Control Switch. Repair procedures
Removal 1. Remove the Electro chromic Inside rear view mirror. Installation 1. Install the Electro chromic Inside rear view mirror. ...

See also:

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If dust ...

Direct Electro Hydraulic Actuator Coupling. Repair procedures
Inspection All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid is therefore not necessary (zero maintenance, ...

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). Green arrow indicators on the instrument panel indicate which turn signal is ...