Volvo XC90: Buckling and unbuckling seat belts - SAFETYVolvo XC90: Buckling and unbuckling seat belts

Make sure that all passengers have buckled their seat belts before starting to drive.

Buckling seat belts

  1. Pull out the belt slowly and make sure it is not twisted or damaged.

    If the seat belt in the second row center seating position1 is used, make sure it is properly positioned in the correct seat belt guide.

    NOTE

    The seat belt is equipped with a seat belt retractor that will lock up in the following situations:

    • if the belt is pulled out too quickly.
    • during braking and acceleration.
    • if the vehicle is leaning excessively.
    • when driving in turns.
    • if the automatic locking retractor/emergency locking retractor (ALR/ELR) is activated. Each seat belt (except for the driver's) is equipped with an ALR function, which is designed to keep the seat belt taut when installing a child restraint. ALR is activated when the seat belt is pulled out as far as possible. If this is done, a sound from the seat belt retractor will be audible, which is normal. The seat belt can now only be fed into the retractor, not pulled out. This function is automatically disabled when the seat belt is unbuckled and fully retracted.
  2. Buckle the seat belt by pushing the latch plate into the receptacle.

    A distinct "click" indicates that the belt is locked into place.

    WARNING

    Always insert the seat belt latch plate into the belt buckle on the correct side. Failure to do so could cause the seat belts and belt buckles to malfunction in a collision. There is a risk of serious injury.

  3. The height of the seat belts in the front seats and outboard rear seating positions can be adjusted.

    Volvo XC90. Buckling and unbuckling seat belts

    Press the button on the seat belt holder and move the belt up or down.

    Position the belt as high as possible without it chafing against the neck.

    Volvo XC90. Buckling and unbuckling seat belts

    The belt should be positioned closely over the shoulder (against the collarbone, not down over the arm).

     

  4. The belt should be positioned closely over the shoulder (against the collarbone, not down over the arm).

    Volvo XC90. Buckling and unbuckling seat belts

    The lap section of the seat belt should be positioned low on the hips (not against the abdomen).

     

WARNING

Never use a seat belt for more than one occupant. Never wear the shoulder portion of the belt under the arm, behind the back or otherwise out of position. Such use could cause injury in the event of an accident. As seat belts lose much of their strength when exposed to violent stretching, they should be replaced after any collision, even if they appear to be undamaged.

WARNING

Do not use clips or fasten the belts around hooks or other parts of the interior. This will prevent the seat belt from fitting properly.

WARNING Never damage the seat belts and never insert any foreign objects into the belt buckle. This may cause the seat belts and belt buckles to malfunction in a collision. There is a risk of serious injury.

Unbuckling seat belts

  1. Press the red button on the seat belt receptacle and make sure the seat belt retracts fully into the retractor slot.
  2. If it does not fully retract, guide the belt manually into the slot and make sure it does not hang loose.

    If the seat belt in the second row center seating position¹ is used, make sure it is properly positioned in the correct seat belt guide.

1 On five- and seven-seat vehicles.

Seat belts
Seat belts should always be worn by all occupants in your vehicle. Children should be properly restrained using an infant seat, adjustable child seat or booster cushion as determined by age, weight and ...

Seat belt tensioners
The vehicle is equipped with standard and electric seat belt tensioners that can help tension the seat belt in a critical situation or collision. Standard seat belt tensioners All seat belts are equipped ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Sunshade
To open the sunshade Press the sunshade open button (1). To close the sunshade when the sunroof glass is closed - Press the sunshade close button (2). ❈ When you press the sunshade close button ...

Lumbar support (for driver’s seat)
1. Press the front portion of the switch to increase support or the rear portion of the switch to decrease support. 2. Release the switch once it reaches the desired position. ...