Volvo XC90: Changing settings in the center display's Top view - DISPLAYS AND VOICE CONTROLVolvo XC90: Changing settings in the center display's Top view

You can change settings and information for many of the vehicle's functions via the center display.

  1. Open Top view by tapping the tab at the top of the screen or by dragging/swiping from the top of the screen downward.
  2. Tap Settings to open the Settings menu.

    Volvo XC90. Changing settings in the center display's Top view

    Top view with Settings button.

  3. Tap one of the categories and sub-categories to navigate to the desired setting.
  4. Change the setting(s). Different types of settings are changed in different ways.
    • Changes are saved immediately.

    Volvo XC90. Changing settings in the center display's Top view

    A sub-category in the Settings menu with various possible settings; has a multi-selection button and radio buttons.

Changing system units of measurement. Changing system language
Changing system units of measurement Unit settings are adjusted in the Settings menu in the center display. Tap Settings in the Top view in the center display. Proceed to System System Languages and Units ...

Opening contextual setting in the center display
Most of the settings for the vehicle's basic apps can be changed directly in Top view in the center display via contextual settings. Top view with button for contextual settings. Contextual setting is ...

See also:

Activating and deactivating private locking
Private locking is activated using the function button in the center display and a PIN code. NOTE For the valet lock function to be activated the car must be in at least ignition mode I. Two codes are ...

Connected Safety limitations
Information on vehicles with activated hazard warning flashers or which have detected slippery road conditions is not always communicated between all vehicles in the affected area. This may be the case ...

Canister. Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Disconnect the canister close valve connector (A). 4. Disconnect the ventilation tube quick-connector ...