Hyundai Santa Fe: Emergency Fastening Device (EFD). Components and Components Location
Components
Emergency Fastening Device (EFD). Description and Operation
Description The Emergency Fastening Device (EFD) operates as well as the belt pretensioner at the same time, if it gets into its deploy condition after a collision. It is located near the anchor on the ...
Emergency Fastening Device (EFD). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the locking mechanism (A), using a (-) driver (B) turn it counter clockwise. From ...
See also:
Specifications
Specification Item Specification Ultrasonic sensor Voltage rating DC 12 V Detecting range 30 cm ~ 120 cm Operation voltage DC 9 ~ 16 V Operation current MAX 300 mA Operation temperature -30°C ~ +80°C ...
Engine Oil Pressure Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When the engine oil pressure is low. If the ...
Temperature control
The temperature will increase by pushing the up button. Each push of the button will cause the temperature to increase by 1°F/0.5°C. The temperature will decrease by pushing the down button. Each push ...
