Hyundai Santa Fe: Front Door Module. Components and Components Location - Front Door - Body (Interior and Exterior)Hyundai Santa Fe: Front Door Module. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Module. Components and Components Location

Component Location

1. Front door module


Front Door Window Glass. Repair procedures
Replacement 1. Remove the front door trim. 2. Remove the front door belt inside weatherstrip (A). 3. Remove the front door window glass mounting hole plug (B). • Be careful not to drop the glass and/or ...

Front Door Module. Repair procedures
Replacement 1. Remove the front door window glass. 2. Remove the front door outside handle. 3. Disconnect the front door main connector (A). 4. Loosen the front door outside handle base mounting bolt (A). ...

See also:

Front Stabilizer Bar. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Hands Free Switch. Schematic Diagrams
Circuit Diagram ...

SS-A Solenoid Valve(ON/OFF). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...