Volvo XC90: Ignition modes - STARTING AND DRIVINGVolvo XC90: Ignition modes

The vehicle's ignition can be put in various modes (levels) to make different functions available.

To enable the use of a limited number of functions when the engine is not running, the ignition can be put in one of three different levels: 0, I and II. These levels are referred to as "ignition modes" in the Owner's Manual.

The following table shows which functions are available in each ignition mode:

Volvo XC90. Ignition modes

Volvo XC90. Ignition modes

A Also activated when the door is opened.

* Option/accessory.

Switching off the vehicle
The vehicle can be switched off using the start knob in the tunnel console. Start knob in the tunnel console. To switch off the vehicle: Turn the start knob clockwise and release to switch off the vehicle. ...

Selecting ignition mode
The vehicle's ignition can be put in various modes (levels) to make different functions available. Selecting an ignition mode Start knob in the tunnel console. Ignition mode 0 – Unlock the vehicle and ...

See also:

Repair procedures
Disassembly • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. • Mark all wiring and hoses to avoid ...

Rear Body. Body Repair
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer panel rear corner Tail gate hinge mounting hole (Ø12) Tail gate hinge mounting hole ...

Auto Head Lamp Leveling Unit. Description and Operation
Description According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from ...