Hyundai Santa Fe: Inside Rear View Repair procedures - Mirror - Body (Interior and Exterior)Hyundai Santa Fe: Inside Rear View Repair procedures

Replacement

[Manual Mirror]
•
Put on gloves to protect your hands.
1.
Loosen the inside rear view mirror mounting screw (C).
2.
Push the inside rear view mirror base (B) up to remove the inside rear view mirror assembly (A).
3.
Install in the reverse order of removal.
[ECM Mirror]
•
Put on gloves to protect your hands.
1.
Remove the ECM mirror cover (A).
2.
Disconnect the ECM mirror connector (B).
3.
Loosen the ECM mirror mounting screw.
4.
Push the ECM mirror base up to remove the ECM mirror assembly (A).
5.
Install in the reverse order of removal.
•
Make sure the connector is connected properly.

    Inside Rear View Components and Components Location
    Component Location 1. Inside rear view mirror ...

    Cowl Top Cover
    ...

    See also:

    Components and Components Location
    Components 1. Airbag module 2. Bezel 3. Remote control assembly 4. Steering wheel 5. Wiring 6. Lower cover ...

    General Information. Troubleshooting
    Troubleshooting Symption Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Lo ...

    Line Pressure Control Solenoid Valve. Description and Operation
    Description line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...