Volvo XC90: Jack - WHEELS AND TIRESVolvo XC90: Jack

(Option/accessory.)

The jack can be used to lift the vehicle to e.g. change a wheel.

Volvo XC90. Jack

CAUTION

  • When not in use, the jack* should be kept in its storage compartment under the cargo compartment floor.
  • The jack provided with your vehicle is intended to be used only in temporary situations such as changing wheels in the event of a flat tire. Only the jack that came with your particular model should be used to lift the vehicle. If the vehicle needs to be lifted more frequently or for a prolonged period, using a garage jack or hoist is recommended. Always follow this device's instructions for use.

The jack needs to be cranked together to the correct position in order to fit.

For vehicles with Leveling Control*: If the vehicle is equipped with the optional pneumatic suspension, it must be turned off before the vehicle is lifted on a jack.

* Option/accessory.

Tool kit
Tools for e.g. towing or changing wheels are provided in the vehicle's cargo compartment. All the tools are located in a foam block under the cargo compartment floor. Jack* Tool for removing the plastic ...

Wheel bolts
The wheel bolts hold the wheel in place on the wheel hub. Only use rims that have been tested and approved by Volvo and are included in Volvo's original product range. Use a torque wrench to check that ...

See also:

Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove the bar ...

Storing radio channels in the Radio favorites app
It is possible to add a radio station in the Radio favorites app and in the list of favorites for the waveband (e.g. FM). Instructions for adding and removing radio channels are provided below. ...

Interior overview
1. Inside door handle 2. Outside rearview mirror control 3. Power window lock button 4. Central door lock switch 5. Power window switch 6. Fuel-filler lid opener 7. Instrument panel illumination control ...