Hyundai Santa Fe: Passive Occupant Detection System (PODS-F). Description and Operation - SRSCM - RestraintHyundai Santa Fe: Passive Occupant Detection System (PODS-F). Description and Operation

Description

In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger presences status and send signal to SRSCM via CAN.
SRSCM recognizes the signal as 2(two) different classifications; that is, 1(Empty or small occupant with child restraint system), 2(Occupied with large occupant and small occupant).
With these signal, ACU determines whether it needs to deploy the PAB(Passenger Airbag) or not.

    Seat Belt Buckle Switch (BS). Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat asse ...

    See also:

    Lumbar support (for driver’s seat)
    The lumbar support can be adjusted by pressing the switch. 1. Press the front portion (1) of the switch to increase support, or the rear portion (2) of the switch, to decrease support. 2. Releas ...

    ETC (Electronic Throttle Control) System. Specifications
    Specification [Throttle Position Sensor (TPS)] Throttle Angle(°) Output Voltage(V) TPS1 TPS2 0 0.0 5.0 ...

    To set cruise control speed
    1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must be mor ...