Volvo XC90: Removing the plastic cover to replace bulbs - MAINTENANCE AND SERVICEVolvo XC90: Removing the plastic cover to replace bulbs

The headlight bulbs can be replaced without the assistance of a workshop, but before a bulb can be replaced, the plastic cover over the headlight needs to be removed.

Volvo XC90. Removing the plastic cover to replace bulbs

Volvo XC90. Removing the plastic cover to replace bulbs

Volvo XC90. Removing the plastic cover to replace bulbs Lift the rubber strip by pressing it inward into the engine compartment.

Volvo XC90. Removing the plastic cover to replace bulbs Release the pins in the plastic cover's four clips by pressing them down with a screwdriver or similar object and remove the covering.

Put the cover back in place in the reverse order.

Replacing bulbs
Bulb types vary depending on model and equipment level. If a light bulb1 breaks, it can be replaced by following the procedure shown in the Owner's Manual. If you are experiencing problems with any lights ...

Removing the rectangular headlight cover
Most of the bulbs in the headlight housing can be accessed when the rectangular cover is removed. Before the rectangular cover can be removed, the plastic covering over the headlight must be removed. Left ...

See also:

Engine Cover. Repair procedures
Removal and Installation 1. Remove the engine cover (A). 2. Install in the reverse order of removal. ...

Front Seat Frame Assembly. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Side Impact Sensor (SIS). Repair procedures
Removal Pressure Side Impact Sensor (P-SIS) • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connector(s), ...