Volvo XC90: Replacing fuses - MAINTENANCE AND SERVICEVolvo XC90: Replacing fuses

All electrical functions and components are protected by a number of fuses in order to protect the vehicle's electrical system from damage by short circuiting or overloading.

  1. Refer to the fuse diagram to locate the fuse.
  2. Pull out the fuse and examine it from the side to determine if the curved metal wire in the fuse is intact.
  3. If the wire is broken, replace the fuse with a new fuse of the same color and amperage.

WARNING

Never use a foreign object or a fuse with a higher amperage than that specified to replace a fuse. This could cause significant damage to the electrical system and possibly lead to a fire.

WARNING

Contact an authorized Volvo workshop for assistance replacing fuses not listed in the Owner's Manual. If fuse replacement is performed incorrectly, significant damage can be caused to the electrical system.

Fuses and fuseboxes
All electrical functions and components are protected by a number of fuses in order to protect the vehicle's electrical system from damage by short circuiting or overloading. WARNING Never use a foreign ...

Fuses in the engine compartment
The fuses in the engine compartment help protect electrical components such as engine and brake functions. Fuse pliers are provided on the inside of the fuse box cover to assist in removing and inserting ...

See also:

Downhill brake control (DBC)
The Downhill Brake Control (DBC) assists the driver when descending a steep hill without the driver depressing the brake pedal. It slows the vehicle to under approximately 6.3 mph (10 km/h) and lets the ...

Wiper blades and washer fluid. Using the windshield wipers
The wipers and the washer fluid are designed to improve visibility and the headlight pattern. The washer nozzles are heated* automatically in cold weather to prevent the washer fluid from freezing. When ...

Illuminated ignition switch
Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition ...