Volvo XC90: Replacing windshield wiper blades - MAINTENANCE AND SERVICEVolvo XC90: Replacing windshield wiper blades

The wiper blades help remove water from the windshield and rear window. Along with the washer fluid, they are designed to clean the glass and help improve visibility while driving. The windshield and rear window wiper blades can be replaced.

Volvo XC90. Replacing windshield wiper blades

Volvo XC90. Replacing windshield wiper blades

Volvo XC90. Replacing windshield wiper blades Raise the wiper arms to the service position. Service position is activated/deactivated via the function view in the center display when the car is stationary and the windshield wipers are not on. Press the button on the wiper blade attachment and pull the wiper blade straight out, parallel with the wiper arm.

Volvo XC90. Replacing windshield wiper blades Slide in a new wiper blade until it clicks into place.

  1. Check to make sure the blade is securely in place.
  2. Press the wiper blade back against the windshield.

Wiper blades come in varying lengths

Volvo XC90. Replacing windshield wiper blades

NOTE

When changing wiper blades, make sure that the blades are of different lengths. The blade on the driver's side is longer than the one on the passenger side.

Changing rear window wipers
The wiper blades help remove water from the windshield and rear window. Along with the washer fluid, they are designed to clean the glass and help improve visibility while driving. The windshield and rear ...

Putting the wiper blades in service position
The windshield wiper blades must be in the service (vertical) position for certain operations, e.g. replacing the blades. Windshield wipers in the service position. The windshield wipers must be in the ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS). Schematic Diagrams
Circuit Diagram ...

Starting the radio
The radio is started from the center display's App view. Open the desired waveband (e.g. FM) from App view. Select a radio station. ...

Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these steps: 1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has been completed. 2. When the indicator ...