Volvo XC90: Resetting user data when the vehicle changes owners. Resetting center display 
settings - DISPLAYS AND VOICE CONTROLVolvo XC90: Resetting user data when the vehicle changes owners. Resetting center display settings

Resetting user data when the vehicle changes owners

If the vehicle changes owners, all user data and system settings should be reset to factory defaults.

Vehicle settings can be reset at different levels. Reset all user data and system settings to their original factory defaults when the vehicle changes owner. It is also important to change the owner of the Volvo On Call service.

Resetting center display settings

All settings made in the center display's Settings menu can be reset to default values.

Two types of reset

There are two types of reset in the Settings menu:

  • Factory Reset- erases all data and files and resets all settings to factory default.
  • Reset Personal Settings- erases personal data and resets personalized settings to factory default.

Resetting settings

Follow these instructions to reset the settings.

NOTE

Factory Reset is only possible when the vehicle is stationary.

  1. Tap Settings in the center display's Top view.
  2. Proceed to System Volvo XC90. settings Factory Reset.
  3. Select the type of reset you would like to do.
    • A pop-up window will appear.
  4. Tap OK to confirm the reset.

    For Reset Personal Settings, confirm the reset by tapping Reset for the active profile or Reset for all profiles.

    • The selected settings will be reset.
Opening contextual setting in the center display
Most of the settings for the vehicle's basic apps can be changed directly in Top view in the center display via contextual settings. Top view with button for contextual settings. Contextual setting is ...

Table of settings in the center display
The center display's Settings menu has a number of main categories and sub-categories that contain settings and information for many of the vehicle's features and functions. There are seven main categories: ...

See also:

Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...

If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...

Automatic Transaxle. Repair procedures
Removal 1. Remove the engine cover. 2. Remove the air cleaner assembly and air duct. 3. Remove the battery and battery tray. 4. Disconnect the inhibitor switch connect (A) and solenoid valve connector ...