Volvo XC90: Road Sign Information - DRIVER SUPPORTVolvo XC90: Road Sign Information

(Option/accessory)

The Road Sign Information (RSI1) function can help the driver observe speed-related road signs.

Volvo XC90. Road Sign Information

Examples of signs that can be detected2.

If the vehicle passes a speed limit sign, it will be displayed in the instrument panel and the head-up display*.

There are also subfunctions for Road Sign Information (RSI3) that can alert the driver if the speed limit has been exceeded or if there are speed cameras nearby.

NOTE

In certain markets, the Road Sign Information * function is only available in combination with Sensus Navigation*.

WARNING

  • The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
  • The driver is advised to read all sections in the Owner's Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
  • Driver support functions are not a substitute for the driver's attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.

1 Road Sign Information

2 Road signs differ according to market ‒ the illustrations shown here are just some examples.

3 Road Sign Information

* Option/accessory.

Connected Safety limitations
Information on vehicles with activated hazard warning flashers or which have detected slippery road conditions is not always communicated between all vehicles in the affected area. This may be the case ...

Activating or deactivating Road Sign Information
(Option/accessory) The Road Sign Information (RSI1) function is optional – the driver can choose to have the function activated or deactivated. Activate or deactivate the function using this button in ...

See also:

Lumbar support (for driver’s seat)
The lumbar support can be adjusted by pressing the switch. 1. Press the front portion (1) of the switch to increase support, or the rear portion (2) of the switch, to decrease support. 2. Release the ...

Specifications
Specification Item Specification Power source 3V Operating temperature -20°C ~ +60°C (-4°F ~ +140°F) RF Modulation FSK LF Modulation ASK RF frequency 315MHz Battery CR2032 Transmissible distance 30m ...

For safe all wheel drive operation
WARNING - All wheel driving When conditions demand the use of four-wheel drive, all functions of your vehicle are exposed to extreme stress. Slow down and be ready for changes in the composition and traction ...