Hyundai Santa Fe (TM): Trip computer (Type A) - LCD DisplayHyundai Santa Fe (TM): Trip computer (Type A)

The trip computer is a microcomputercontrolled driver information system that displays information related to driving.

Information

Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.

Trip modes

To change the trip mode, toggle the "Ë„, Ë…" switch on the steering wheel

  • Manual reset
    To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed.
  • Automatic reset
    To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.
    - After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
    - After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).

For 12.3-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.

Drive info

Trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed.

The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset.

To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.

Since refuel(l)ing

Trip distance (1), average fuel economy (2), and instant fuel economy (3) after the vehicle has been refueled are displayed.

To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.

Accumulated info

Accumulated trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed.

The information is accumulated starting from the last reset.

To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.

Auto stop

AUTO STOP display shows the elapsed time of engine stop by Idle Stop and Go system.

Digital speedometer

Digital speedometer display shows the speed of the vehicle.

User settings mode
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc. 1. Driver Assistance 2. Head-Up Display 3. Cluster 4. Lights 5. Door 6. Convenience 7. Units The information provided ...

Trip computer (Type B)
The trip computer is a microcomputercontrolled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for example Average ...

See also:

For safe all wheel drive operation
WARNING - All wheel driving When conditions demand the use of four-wheel drive, all functions of your vehicle are exposed to extreme stress. Slow down and be ready for changes in the composition and traction ...

Rear Differential Carrier. Components and Components Location
Component 1. Rear Differential Carrier 2. Coupling Assembly ...

Rail Pressure Sensor (RPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Condition Output Voltage (V) Idle  Approx. 1.2 1,500 rpm ...