Volvo XC90: Selecting and activating Adaptive Cruise Control - DRIVER SUPPORTVolvo XC90: Selecting and activating Adaptive Cruise Control

(Depending on market, this function can be either standard or optional.)

Adaptive Cruise Control (ACC1 ) must first be selected and then activated before it can regulate speed and distance.

Volvo XC90. Selecting and activating Adaptive Cruise Control

To start the function:

  • The driver's seat belt must be buckled and the driver's door must be closed.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).
  1. Press the Volvo XC90. Selecting and activating Adaptive Cruise Control (2) or Volvo XC90. Selecting and activating Adaptive Cruise Control (3) button on the steering wheel keypad and scroll to the Adaptive Cruise Control symbol Volvo XC90. Selecting and activating Adaptive Cruise Control (4).
    • Gray symbol – Adaptive Cruise Control is in standby mode.
  2. When Speed Limiter is selected, press Volvo XC90. Selecting and activating Adaptive Cruise Control (1) on the steering wheel keypad to activate.
    • White symbol – Speed Limiter starts and the current speed is stored as the maximum speed.

Reactivating Adaptive Cruise Control to the last stored speed

  • When Adaptive Cruise Control is selected, press Volvo XC90. Selecting and activating Adaptive Cruise Control on the steering wheel keypad to activate.
    • The Cruise Control marking in the instrument panel will change from GRAY to WHITE and the vehicle will then return to the most recently set speed.

WARNING

A noticeable increase in speed may follow when the speed is resumed with the steering wheel button.

1 Adaptive Cruise Control

Adaptive Cruise Control displays
(Option/accessory) (Depending on market, this function can be either standard or optional.) The following illustrations show how Adaptive Cruise Control (ACC1 ) can appear in the various displays in different ...

Deactivating Adaptive Cruise Control
(Depending on market, this function can be either standard or optional.) Adaptive Cruise Control (ACC2) can be deactivated and switched off. Press the button on the steering wheel (1). The symbol and markings ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram ...

Battery Sensor. Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation 1. Install in the ...

Transaxle Oil Temperature Sensor. Schematic Diagrams
Circuit Diagram ...