Volvo XC90: Selecting and activating cruise control - DRIVER SUPPORTVolvo XC90: Selecting and activating cruise control

The Cruise Control (CC1) function must be selected and activated in order to regulate speed.

Volvo XC90. Selecting and activating cruise control

In order to start Cruise Control from standby mode, the vehicle's current speed must be 30 km/h (20 mph) or higher.

  1. Press the Volvo XC90. Selecting and activating cruise control (1) or Volvo XC90. Selecting and activating cruise control (3) button on the steering wheel keypad and scroll to the cruise control symbol Volvo XC90. Selecting and activating cruise control (4).
    • Gray symbol – cruise control is in standby mode.
  2. When cruise control is selected, press Volvo XC90. Selecting and activating cruise control (2) on the steering wheel keypad to activate.
    • White symbol – cruise control starts and the current speed is stored as the maximum speed. The lowest speed that can be set is 30 km/h (20 mph).

Reactivating cruise control to the last stored speed

  • When cruise control is selected, press Volvo XC90. Selecting and activating cruise control on the steering wheel keypad to activate.
    • The Cruise Control marking in the instrument panel will change from GRAY to WHITE and the vehicle will then return to the most recently set speed.

WARNING

A noticeable increase in speed may follow when the speed is resumed with the Volvo XC90. Selecting and activating cruise control steering wheel button.

1 Cruise Control

Cruise control
Cruise Control (CC1) can help the driver maintain an even speed to provide a more relaxing driving experience on highways and long, straight roads with even traffic flows. Function buttons and symbols ...

Deactivating cruise control
Cruise control (CC1) can be deactivated and switched off. Press the button on the steering wheel (2). The symbol and markings turn gray – cruise control goes into standby mode. Press the (1) or (3) buttons ...

See also:

Troubleshooting
Troubleshooting Customer Complaint Analysis Check Sheet There are six areas where a problem can occur: wiring harness, the radio, the CD player, and speaker. Troubleshooting enables you to confine the ...

Aux, USB and iPod® port
If your vehicle has an aux and/or USB(universal serial bus) port or iPod® port, you can use an aux port to connect audio devices and a USB port to plug in a USB, or use the HYUNDAI accessory iPod® cable ...

Activating and deactivating the compass. Calibrating the compass
Activating and deactivating An integrated compass1 in the upper right corner of the rearview mirror shows the direction the vehicle is traveling. The compass is automatically activated when the vehicle ...