Volvo XC90: Selecting ignition mode - STARTING AND DRIVINGVolvo XC90: Selecting ignition mode

The vehicle's ignition can be put in various modes (levels) to make different functions available.

Selecting an ignition mode

Volvo XC90. Selecting ignition mode

Start knob in the tunnel console.

  • Ignition mode 0 – Unlock the vehicle and keep the remote key in the passenger compartment.

NOTE

To set level I or II without engine start – do not depress the brake pedal (or clutch pedal for vehicles with manual transmission) when selecting this ignition mode.

  • Ignition mode I – Turn the start knob clockwise and release it. The control will automatically return to the original position.
  • Ignition mode II – Turn the start knob clockwise and hold it there for approx. 5 seconds. Release the knob, which will automatically return to its original position.
  • Back to ignition mode 0 – To return to ignition mode 0 from modes I and II, turn the start knob clockwise and release it. The control will automatically return to the original position.
Ignition modes
The vehicle's ignition can be put in various modes (levels) to make different functions available. To enable the use of a limited number of functions when the engine is not running, the ignition can be ...

Brake functions
The vehicle's brakes are used to reduce speed or prevent the vehicle from rolling. In addition to the wheel brakes and parking brakes, the vehicle is also equipped with a number of automatic brake assist ...

See also:

To defrost outside windshield
1. Set the temperature to the extreme hot (HI) position. 2. Set the fan speed to the highest (extreme right) position. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected ...

Radar sensor
The radar sensor is used by several driver support systems to detect other vehicles. Location of radar sensor The radar sensor is used by the following functions: Distance Alert* Adaptive Cruise Control* ...

Front Pillar Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...