Volvo XC90: Setting the temperature for the front seats - CLIMATE CONTROLVolvo XC90: Setting the temperature for the front seats

(The same setting applies to the rear seats with the 2-zone climate system.)

The temperature can be set to the desired number of degrees for the front seat climate zones.

Volvo XC90. Setting the temperature for the front seats

Temperature buttons in the climate bar.

  1. Tap the left- or right-side temperature buttons in the center display's climate bar to open the control.

    Volvo XC90. Setting the temperature for the front seats

    Temperature control.

  2. Set the temperature by doing one of the following:
    • dragging the control to the desired temperature, or
    • tapping + в€’ to raise/lower the temperature.
    • The temperature will be set and the button will display the new temperature.

NOTE

Heating/cooling cannot be accelerated by choosing a higher/lower temperature than the desired temperature.

Setting the blower speed for the rear seats
(Option/accessory) The blower can be set to several different automatically controlled speeds for the rear seat. Setting blower speed for the rear seats from the front seats Tap the symbol in the center ...

Setting the temperature for the rear seats
The temperature can be set to the desired number of degrees for the rear seat climate zones. Setting the temperature for the rear seats from the front seats Tap the symbol in the center of the climate ...

See also:

Using the electrical outlets
The 12 V outlet can be used for devices intended for this such as MP3 players, coolers and cellular phones. The ignition must be in at least mode I for the outlets to supply current. The outlets will then ...

Front seat massage settings
(Option/accessory) The settings for the multifunctional seats can be adjusted using either the mutifunction control on the side of the seat or the center display. The adjustment settings are shown in the ...

Relay Box (Passenger Compartment). Repair procedures
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? If a fuse is to ...