Hyundai Santa Fe: Smooth cornering - Special driving conditions - Driving your vehicleHyundai Santa Fe: Smooth cornering

Avoid braking or gear changing in corners, especially when roads are wet. Ideally,

Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to a minimum.

    Rocking the vehicle
    If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth betwe ...

    Driving at night
    Because night driving presents more hazards than driving in the daylight, here are some important tips to remember: Slow down and keep more distance between you and other vehicles, as it may ...

    See also:

    Jump starting
    Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures. If in doubt, we strongly recomme ...

    Trailing Arm. Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

    Deactivating cruise control
    Cruise control (CC1) can be deactivated and switched off. Press the button on the steering wheel (2). The symbol and markings turn gray – cruise control goes into standby mode. Press ...