Hyundai Santa Fe: Specifications - General Information - Body (Interior and Exterior) - Hyundai Santa Fe DM 2013-2019 Service ManualHyundai Santa Fe: Specifications

Specifications

Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Tail Gate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)

Sealant
Applied parts
Bead width
Panorama Sunroof
Height : 13.5 mm (0.5315 in.)
Width : 12 mm (0.4724 in.)
Windshield Glass
Height : 12 mm (0.4724 in.)
Width : 8 mm (0.3150 in.)


Tightening Torque

Items
N.m
Kgf.m
lb-ft
Front and rear doors
Door hinge to body
33.3 ~ 41.2
3.4 ~ 4.2
24.6 ~ 30.4
Door hinge to door
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Door checker to door
3.9 ~ 5.9
0.4 ~ 0.6
2.9 ~ 4.3
Door checker to body
19.6 ~ 29.4
2.0 ~ 3.0
14.5 ~ 21.7
Door glass mounting bolt
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Outside handle base mounting bolt
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Door channel mounting bolt and nuts
3.9 ~ 5.9
0.4 ~ 0.6
2.9 ~ 4.3
Door latch mounting bolts
7.8 ~ 10.8
0.8 ~ 1.1
5.8 ~ 8.0
Door module mounting bolts
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Door striker mounting bolts
16.7 ~ 21.6
1.7 ~ 2.2
12.3 ~ 15.9
Tail gate
Tail gate hinge to body
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Tail gate hinge to tail gate
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Tail gate latch mounting bolts
6.9 ~ 10.8
0.7 ~ 1.1
5.1 ~ 8.0
Tail gate striker mounting bolts
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Hood
Hood hinge to body
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Hood hinge to hood
21.6 ~ 26.5
2.2 ~ 2.7
15.9 ~ 19.5
Hood latch to body
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Seat 
Front seat mounting bolts
34.3 ~ 53.9
3.5 ~ 5.5
25.3 ~ 39.8
Front seat frame mounting bolts
44.1 ~ 53.9
4.5 ~ 5.5
32.5 ~ 39.8
Front seat cushion track mounting bolts
44.1 ~ 53.9
4.5 ~ 5.5
32.5 ~ 39.8
Rear seat mounting bolts
16.7 ~ 25.5
1.7 ~ 2.6
12.3 ~ 18.8
Rear seat latch mounting bolts
19.6 ~ 29.4
2.0 ~ 3.0
14.5 ~ 21.7
Rear seat frame mounting bolts
44.1 ~ 53.9
4.5 ~ 5.5
32.5 ~ 39.8
Seat belt
Height adjuster mounting bolts
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Front seat belt upper anchor mounting bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Front seat belt lower anchor mounting bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Front seat belt pretensioner mounting bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Rear seat belt lower anchor mounting bolts
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Rear seat belt retractor mounting bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Rear center seat belt retractor mounting nut
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Rear center seat belt buckle rail mounting nut
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Seat belt buckle mounting bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
Outside rearview mirror
Outside rearview mirror mounting nuts
6.9 ~ 10.8
0.7 ~ 1.1
5.1 ~ 8.0
Wiper arm
Wiper arm mounting nuts
22.6 ~ 26.5
2.3 ~ 2.7
16.6 ~ 19.5
Rear spoiler
Rear spoiler mounting nuts
5.9 ~ 6.4
0.6 ~ 0.65
4.3 ~ 4.7
Quarter fixed glass
Quarter fixed glass mounting nuts
3.9 ~ 4.4
0.4 ~ 0.45
2.9 ~ 3.3
Panorama sunroof
Panorama sunroof mounting nuts
6.9 ~ 10.8
0.7 ~ 1.1
5.1 ~ 8.0
Panorama sunroof mounting bolts
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7


    Special Service Tools
    Special Service Tools Tool (Number and name) Illustration Use 09861-31100 Sealany cut-out tool Cutting windshield ...

    See also:

    This device complies with Part 15 of the FCC Rules
    Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may c ...

    Reservoir Tank. Repair procedures
    Removal and Installation 1. Remove the over flow hose(A). 2. Remove the reservoir tank(B). Tightening torque: ...

    Knee Airbag (KAB) Module. Description and Operation
    Description The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB. ...