Hyundai Santa Fe: Specifications - Auto Lighting Control System - Body Electrical SystemHyundai Santa Fe: Specifications

Specifications

Items
Specifications
Rated voltage
5V
Load
Max. 1mA (When head lamp lighting)
Illuminations (LUX)
50
1.42 ± 0.31V
100
2.63 ± 0.58V
150
3.84 ± 0.84V


Components and Components Location
Component Location 1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. BCM (Body Control Module) ...

See also:

If you have a flat tire while driving
If a tire goes flat while you are driving: 1. Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off ...

Checking the engine oil level
Type A Type B 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for ...

Rear Seat Belt Buckle. Repair procedures
Replacement [Second row seat belt buckle] • Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B). 1. Place the second ...