Hyundai Santa Fe: SS-B Solenoid Valve(ON/OFF). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe: SS-B Solenoid Valve(ON/OFF). Specifications

Specifications

ON/OFF Solenoid Valve(SS-B)
▷ Control type : Normal low type
Control pressure kpa
(kgf/cm², psi)
490.33(5.0, 71.12)
Internal resistance(Ω)
10~11


SS-B Solenoid Valve(ON/OFF). Description and Operation
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

SS-B Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...

See also:

Transaxle Oil Temperature Sensor. Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...

Tail Gate Trim. Repair procedures
Replacement [Tail gate trim] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent ...

Oil Seal. Repair procedures
Replacement [Right side] 1. Remove the driveshaft assembly. (RH side) 2. Remove the dust cover (A). 3. Remove the oil seal (A, B). 4. Install the oil seal with special service tools. • Apply lithium ...