Volvo XC90: The Launch function - STARTING AND DRIVINGVolvo XC90: The Launch function

(Option/accessory.)

Launch can be used to provide maximum acceleration from a standstill. The function is available for the drive modes: Dynamic, Comfort and Individual.

Activating Launch

Make sure that the vehicle is stationary and that the wheels are pointing straight ahead.

  1. Put the gear selector in D position.
  2. Depress the brake pedal fully.
  3. Then fully depress the accelerator pedal.
  4. Release the brake pedal within 2 seconds.

NOTE

If the Launch function does not work, wait a few minutes to let the driveline reach working temperature before trying again.

CAUTION

The driveline is exposed to wear when using Launch and the function is therefore only available a limited number of times.

The kickdown function
Kickdown can be used when maximum acceleration is needed e.g. when passing. When the accelerator pedal is depressed all the way to the floor (past the normal full accelerator position), the transmission ...

Automatic transmission symbols and messages
If a problem occurs with the transmission, a symbol and a message are displayed in the instrument panel. CAUTION Check the operating temperature of the transmission to help avoid damage to any of the drive ...

See also:

Description and Operation
Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle ...

Hill Descent Control
(Option/accessory.) The function for assisting when driving downhill (HDC1) is a low-speed function with increased engine braking. The function makes it possible to increase or decrease the vehicle's speed ...

Roof Antenna. Components and Components Location
Components ...