Hyundai Santa Fe: Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed.
- A door is opened without using the transmitter, smart key or mechanical key.
- The tailgate is opened without using the transmitter, smart key.
- The engine hood is opened.
The horn will sound and the hazard warning lights will blink continuously for approximately 30 seconds. The alarm will repeat once more unless the system is disarmed. To turn off the system, unlock the doors with the mechanical key or transmitter or smart key.
Armed stage
Using the smart key (if equipped)
Park the vehicle and stop the engine. Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors, the engine hood and tailgate lid are ...
Disarmed stage
Using the smart key
The system will be disarmed when the doors are unlocked by pressing the unlock
button on the smart key or pressing the lock/unlock button of the front outside
door handle with ...
See also:
Purge Control Solenoid Valve (PCSV). Description and Operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when ...
Battery replacement
A smart key battery should last for several years, but if the smart key is not
working properly, try replacing the battery with a new one. If you are unsure how
to use your smart key or replace ...
Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should
you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate
the keys easily. Remove t ...