Volvo XC90: Tool kit - WHEELS AND TIRESVolvo XC90: Tool kit

Tools for e.g. towing or changing wheels are provided in the vehicle's cargo compartment.

Volvo XC90. Tool kit

All the tools are located in a foam block under the cargo compartment floor.

Volvo XC90. Tool kit Jack*

Volvo XC90. Tool kit Tool for removing the plastic wheel bolt covers

Volvo XC90. Tool kit Funnel for refilling fluids

Volvo XC90. Tool kit Wheel bolt key* and towing eyelet

If the vehicle is equipped with a spare tire*1, a jack and lug wrench are provided.

1 Not available on all models.

* Option/accessory.

Changing a wheel
Wheel changes must always be carried out correctly. The following instructions show how to remove and install a wheel and what is important to keep in mind. Make sure that the tire dimension is approved ...

Jack
(Option/accessory.) The jack can be used to lift the vehicle to e.g. change a wheel. CAUTION When not in use, the jack* should be kept in its storage compartment under the cargo compartment floor. The ...

See also:

Electronic stability control (ESC)
The Electronic Stability Control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies the ...

Rear Door Inside Handle. Repair procedures
Replacement 1. Remove the rear door trim. 2. After loosening the mounting screws, then remove the rear door inside handle (A). 3. Install in the reverse order of removal. • Make sure the door locks/unlocks ...

Ignition Coil. Description and Operation
Description An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spark in the spark plugs ...