Volvo XC90: Using high beam - LIGHTINGVolvo XC90: Using high beam

High beam is operated via the left-hand steering wheel lever. High beam is the vehicle's strongest lighting and should be used when driving in dark conditions, provided it does not blind other road users, to improve visibility.

Volvo XC90. Using high beam

Steering wheel lever with lighting ring.

High beam flash

Volvo XC90. Using high beam Move the steering wheel lever slightly backward to the high beam flash mode. The high beams will illuminate until the lever is released.

High beams

Volvo XC90. Using high beam The high beams can be activated when the lighting ring is in mode Volvo XC90. Using high beam1 or

Volvo XC90. Using high beam . Activate high beams by moving the steering wheel lever forward.

Volvo XC90. Using high beam Deactivate by moving the steering wheel lever backward.

When the high beams are activated, the Volvo XC90. Using high beam symbol will be illuminated in the instrument panel.

1 When the low beams are on.

Low beams
When driving with the lighting ring in the position, low beam will be automatically activated in weak daylight or dark conditions, when the ignition is in the II position. Lighting ring in AUTO position. ...

Active high beam
Active high beams is a function that uses camera sensors in the upper edge of the windshield to detect the headlights of approaching vehicles or the taillights of the vehicle directly ahead. When either ...

See also:

Child restraint system
Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics, ...

City Safety limitations
City Safety1 functionality may be reduced in certain situations. Surroundings Low objects Hanging objects, such as flags for overhanging loads or accessories such as auxiliary lights or front protective ...

License plate lamp bulb replacement
1. Loosen the lens retaining screws with a screwdriver. 2. Remove the lens. 3. Remove the bulb. 4. Install a new bulb. 5. Reinstall the lens securely with the lens retaining screws. ...