Hyundai Santa Fe: Welcome system - Features of your vehicleHyundai Santa Fe: Welcome system

Headlamp welcome

When the headlight(light switch in the headlight or AUTO position) is on and all doors (and tailgate) are locked and closed, the headlight, position light and tail light will come on for 15 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.

At this time, if you press the door lock button (on the transmitter or smart key), the lights will turn off immediately.

Interior light

When the interior light switch is in the DOOR position and all doors (and tailgate) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.
    - When the button of the outside door handle is pressed.

At this time, if you press the door lock button, the lamps will turn off immediately.

Puddle lamp and pocket lamp

When all doors are locked and closed, the puddle lamp and pocket lamp will come on for 15 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.
    - When the button of the outside door handle is pressed.
    - When the vehicle is approached with the smart key in possession.

At this time, if you press the door lock button, the lamps will turn off immediately.

    Vanity mirror lamp
    Pull the sunvisor downward and you can turn the vanity mirror lamp ON or OFF by pushing the button. : To turn the lamp ON. O : To turn the lamp OFF. CAUTION To prevent unnecessary batter ...

    Defroster
    CAUTION To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ✽ NOT ...

    See also:

    Cowl Side Trim. Components and Components Location
    Component Location 1. Cowl side trim ...

    Positive Crankcase Ventilation (PCV) Valve. Repair procedures
    Removal 1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin ...

    Steering Angle Sensor. Description and Operation
    Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine tur ...