Volvo XC90: Winter driving - STARTING AND DRIVINGVolvo XC90: Winter driving

It is important to check the vehicle before driving in cold/snowy conditions to make sure it can be driven safely.

Before the cold season arrives:

  • Make sure the engine coolant contains 50% antifreeze. This mixture helps protect the engine from frost erosion down to approx. –35 °C (–31 °F). Do not mix different types of antifreeze as this could pose a health risk.
  • Keep the fuel tank well filled to prevent condensation from forming.
  • Check the viscosity of the engine oil. Oil with low viscosity (thinner oil) improves cold-weather starting and reduces fuel consumption when driving with a cold engine.
  • Check the condition and charge level of the start battery. Cold weather places greater demands on the start battery and reduces its capacity.
  • Use washer fluid containing antifreeze to help prevent ice from forming in the washer fluid reservoir.

See separate section for engine oil recommendations.

Slippery driving conditions

To help optimize traction and roadholding, Volvo recommends using snow tires on all wheels whenever there is a risk of snow or ice on the road.

NOTE

Certain countries require use of winter tires by law. Not all countries permit the use of studded tires.

Practice driving on slippery surfaces under controlled conditions to learn how the vehicle reacts.

Preparing for a long trip
It is important to have the vehicle's systems and equipment checked carefully before driving long distances. Check that the engine is running properly and that fuel consumption is normal there are no leaks ...

Driving through standing water
It may be necessary to drive the vehicle through standing water e.g. deep puddles or flooding on the road. This must be done with great caution. The vehicle can be driven through water up to a depth of ...

See also:

Front Strut Assembly. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Air quality
(Option/accessory) The materials used in the passenger compartment and air filtering system have been selected to ensure a high level of air quality in the passenger compartment. Materials used in the ...

Power Door Mirror Switch. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front left door trim. 3. Remove the power mirror switch (A) from the door trim. Installation 1. Install the power mirror switch. 2. ...