Hyundai Santa Fe: Filter inspection
If the vehicle is operated in the severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier. When you, the owner, replace the climate control air filter, replace it performing the following procedure, and be careful to avoid damaging other components.
Replace the filter according to the maintenance Schedule.
Filter replacement
1. Open the glove box and remove the support strap (1). 2. With the glove box open, remove the stoppers on both sides. 3. Remove the climate control air filter case by pulling out both sides of the cover. ...
See also:
Input Speed Sensor. Troubleshooting
Signal Waveform ...
Rear Door Outside Handle. Repair procedures
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the rear door outside handle cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...
Power Window Switch. Repair procedures
Diagnosis With GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of power ...
