Hyundai Santa Fe: Input Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
|
Operation condition (°C)°F |
((-)40~150)) -40~302 |
|
|
Air gap(mm)in. |
(0.95~1.65) 0.0374~0.0649 |
|
|
Output voltage(V) |
High |
1.18~1.68 |
|
Low |
0.59~0.84 |
|
Input Speed Sensor. Description and Operation
Description Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor ...
Input Speed Sensor. Schematic Diagrams
Circuit Diagram ...
See also:
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel ...
Floor mat anchor(s)
When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward. WARNING The floor mat must be properly ...
Front Oil Seal. Repair procedures
Removal and Installation 1. Remove the crankshaft damper pulley. 2. Remove the front oil seal(A). 3. Install the crankshaft front oil seal (A) using SST (09214-3K000, 09231-H1100) (B). ...
