Hyundai Santa Fe (TM): Special service tools - Suspension SystemHyundai Santa Fe (TM): Special service tools

Special Service Tools
Tool (Number and Name)
IIIustration
Use
0K546-F6100
Shock absorber lock nut removal tool

Used for remove the front shock absorber lock nut
09546-S1100
Shock absorber lock nut removal tool

Used for remove the rear shock absorber lock nut

Specifications
Specifications Front Suspension Item Specification Suspension type MacPherson Strut Shock absorber Type HPD(High Performance Damper) Rear Suspension Item Specification Suspension type Multi link Shock ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Correct Excessive turning resistance of lower arm ball joint Replace Low tire pressure Adjust No power assist ...

See also:

Front Door Outside Handle. Repair procedures
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door outside handle cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...

Heated Oxygen Sensor (HO2S). Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance ...

Brake Pedal. Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the shower duct (A). 4. Disconnect the stop lamp switch connector (A). ...