Hyundai Santa Fe (TM): Specifications - Emission Control SystemHyundai Santa Fe (TM): Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
20.0 - 22.0 [20°C (68°F)]

Troubleshooting
Troubleshooting Symptom Suspect area Engine will not start or hard to start Vapor hose damaged or disconnected Engine struggles to start Malfunction of the Purge Control Solenoid Valve Rough idle or engine ...

Schematic diagrams
Schematic Diagram ...

See also:

Hazard warning flasher
Type A Type B The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far ...

CVVT Oil Control Valve (OCV). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: ...

Rear Combination Lamp. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B). ...