Hyundai Santa Fe (TM): Specifications
| Specifications |
|
Item |
Specification |
|
|
Type |
Electric Power Steering System |
|
|
Steering gear |
Type |
Rack & Pinion |
|
Rack stroke |
152 ± 1 mm(5.94 ± 0.04 in) |
|
|
Steering angle (Max.) |
Inner |
36.8° +0.5/-1.5 |
|
Outer |
31.9° |
|
| Tightening torque |
|
Item |
Tightening torque (kgf.m) |
||
|
N.m |
kgf.m |
lb-ft |
|
|
Tire wheel Hub nuts |
107.9 - 125.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Steering wheel lock nut |
44.1 - 49.0 |
4.5 - 5.0 |
32.5 - 36.2 |
|
Steering column assembly to Universal joint |
53.9 - 58.8 |
5.5 - 6.0 |
39.8 - 43.4 |
|
Steering column mounting bolts |
53.9 - 58.8 |
5.5 - 6.0 |
39.8 - 43.4 |
|
Steering column mounting nuts |
24.5 - 29.4 |
2.5 - 3.0 |
18.1 - 21.7 |
|
Steering column to Universal joint (M8 BOLT) |
32.4 - 38.3 |
3.3 - 3.8 |
23.9 - 27.5 |
|
Steering column to Universal joint (M10 BOLT) |
49.0 - 58.8 |
5.0 - 6.0 |
36.2 - 43.4 |
|
Tie rod end castle nut |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Steering gear box to sub freame |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Roll rod mounting bolt & nut |
107.9 - 127.5 |
11.0 -13.0 |
79.6 - 94.0 |
|
Lower arm to knuckle |
98.1 - 117.7 |
10.0 -12.0 |
72.3 - 86.8 |
Steering System
...
Special service tools
Special Service Tools Tool (Number and Name) IIIustration Use 09568-2J100 Ball joint remover Tie rod end ball joint removal 09568-4R100 Ball joint remover Lower arm ball joint removal ...
See also:
Oil hydraulic Motor(Actuator). Schematic Diagrams
Circuit Diagram ...
Delta Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Assist Handle. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
