Hyundai Santa Fe (DM): Specifications - Multifunction Switch - Body Electrical SystemHyundai Santa Fe (DM): Specifications

Specifications

Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-22 ~ +176°F (-30°C ~ +80°C)
Rated load
Dimmer & passing switch
High : 0.2A (Relay load)
Low : 0.2A (Relay load)
Passing : 0.2A (Relay load)
Lighting switch
Lighting : 0.2A (Relay load)
(High, Low, Auto)
Front & rear fog lamp switch
0.2A (Relay load)
Turn signal switch
6.6A (Lamp load)
Wiper & mist switch
Low : 4.5A (Motor load)
High : 4.5A (Motor load)
Intermittent : 0.25 mA
Lock : Max. 28A (Motor load)
Washer : 4.0A (Motor load)
Rear wiper & washer
Wiper : 1.0A (Relay load)
Washer : 4.0A (Motor load)


See also:

Front Driveshaft. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Interior care
Interior general precautions Prevent caustic solutions such as perfume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration. If they do contact the dashboard, clean ...

Fuse switch
Always, put the mode switch at the ON position. If you move the switch to the OFF position, some items such as audio and digital clock must be reset and transmitter (or smart key) may not work properly. ...