Hyundai Santa Fe: To resume cruising speed at more than approximately 25 mph (40 km/h) - Cruise control system - Driving your vehicleHyundai Santa Fe: To resume cruising speed at more than approximately 25 mph (40 km/h)

If any method other than the CRUISE button was used to cancel cruising speed

If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you move the lever up (to RES+).

It will not resume, however, if the vehicle speed has dropped below approximately 25 mph (40 km/h).

✽ NOTICE

Always check the road conditions when you move the lever up (to RES+) to resume the speed.

To cancel cruise control, do one of the following
Depress the brake pedal. Shift into N (Neutral) with an automatic transaxle. Press the CANCEL switch located on the steering wheel. Decrease the vehicle speed lower than the memory speed by 9 mph (15 ...

To turn cruise control off, do one of the following
Press the CRUISE button (the CRUISE indicator light in the instrument cluster will go off). Turn the ignition off. Both of these actions cancel cruise control operation. If you want to resume cruise control ...

See also:

Transaxle Oil Temperature Sensor. Specifications
Specifications ▷ Type: Negative Thermal Coefficient Type(NTC) Temp.(°C)°F Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 15.6 (0)32.0 5.88 (20)68.0 2.51 (40)104.0 1.11 (60)140.0 0.61 (80)176.0 0.32 ...

Repair procedures
On-vehicle Inpection • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) • Check that the battery cables ...

Special Service Tools
Special Service Tools Tool(Number and Name) Illustration Use 09581-11000 Piston expander Spreading the front disc brake piston. ...