Hyundai Santa Fe (DM): 26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description
26Brake control solenoid valve(26/B) is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the 26Brake.
Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81~500.14 (0.1~5.1, 1.42~72.54) Current value(mA) 50~850 Internal resistance(Ω) ...
See also:
General Safety Information and Caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally ...
Schematic Diagrams
Schematic Diagram ...
Limitation of Active ECO operation
If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The system will ...
