Hyundai Santa Fe (DM): 4WD ECU. Repair procedures
Replacement
| 1. |
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing
with the GDS tool.
|
| 2. |
Disconnect the battery negative cable from the battery
|
| 3. |
Disconnect the 4WD ECU connector (A).
|
| 4. |
Loosen the nust (A) and then remove the 4WD ECU.
|
Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
Prior to installing a new ECU, upload the original ECU’s clutch
learing to the replacement ECU using the GDS tool.
|
4WD ECU. Schematic Diagrams
Circuit Diagram 4WD ECU Connector Pin Function 1 CAN communication line (Low) 2 CAN communication line (High) 3 - 4 Pressure sensor signal(+) 5 - 6 Lock mode switch 7 Oil pressure motor B 8 Oil pressure ...
See also:
Headrest
The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort. The headrest not only provides comfort for the driver and front passenger, but ...
Rear Seat Cushion Cover. Components and Components Location
Component Location [Second row seat assembly] 1. Rear seat cushion cover [LH] 2. Rear seat cushion cover [RH] [Third row seat assembly] 1. Rear seat cushion cover [LH] 2. Rear seat cushion cover [RH] ...
Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes ...
