Hyundai Santa Fe (DM): Accelerator Position Sensor (APS). Specifications
Specification
|
Accelerator Position |
Output Voltage (V) |
|
|
APS1 |
APS2 |
|
|
C.T |
0.7 ~ 0.8 |
0.275 ~ 0.475 |
|
W.O.T |
3.8 ~ 4.4 |
1.75 ~ 2.35 |
Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...
Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram ...
See also:
Head Lamps. Components and Components
Location
Component 1. Head lamp high beam bulb 2. Dust cap (High) 3. Head lamp low beam bulb 4. Dust cap (Low) 5. Turn signal lamp bulb 6. Turn signal lamp socket 7. Side marker bulb 1. Head lamp high beam bulb ...
Armed stage
Using the smart key (if equipped) Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors, the engine hood and tailgate lid are closed ...
Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove the bar ...
