Hyundai Santa Fe (DM): Air Cleaner. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Santa Fe (DM): Air Cleaner. Repair procedures

Removal and Installation

1.
Remove the engine cover.
2.
Remove the air duct(A).

3.
Remove the battery.
4.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A), the intensifier hose (B).
(2)
Disconnect the air intake hose (C) and then remove the air cleaner assembly (D).

5.
Install in the reverse order of removal.

Air Cleaner. Components and Components Location
Components 1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp ...

Intake Manifold. Components and Components Location
Components 1. Intake manifold assembly 2. Electronic throttle body 3. Intake manifold stay 4. Intake manifold gasket ...

See also:

Engine start/stop button position
OFF White With automatic transaxle To turn off the engine (START/RUN position) or vehicle power (ON position), press the engine start/stop button with the shift lever in the P (Park) position. When you ...

CVVT Oil Control Valve (OCV). Specifications
Specification Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove the bar ...