Hyundai Santa Fe (DM): ATF Warmer. Repair procedures
Removal
1. |
Drain the coolant.
|
2. |
Remove the air cleaner assembly and air duct.
|
3. |
Remove the battery and battery tray.
|
4. |
Remove the under cover(A).
|
5. |
Disconnect the coolant hose (B) after removing the coolant hose
clamp (A).
|
6. |
Disconnect the hose (B) after removing the automatic transaxle
fluid cooler hose clamp (A).
|
7. |
Remove the ATF Warmer (A).
|
Installation
1. |
Installation is the reverse of removal.
|
ATF Warmer. Components and Components Location
Component Location 1. ATF Warmar 2. Bypass valve 3. ATF hose&pipe 4. Coolant hose&pipe Component 1. ATF Warmar 2. Bypass valve 3. ATF hose&pipe 4. Coolant hose&pipe ...Clutch & Brake
...See also:
Seat warmer
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passenger's ...
Battery recharging
Your vehicle has a maintenance-free, calcium-based battery. If the battery becomes discharged in a short time (because, for example, the headlights or interior lights were left on while the vehicle was ...
Front Wheel Repair procedures
Removal 1. Remove the driveshaft and axle. 2. Remove the propeller shaft (A). Tightening torque : 49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft) 3. Loosen the transfer upper & lower mounting bolts. (transfer ...