Hyundai Santa Fe (DM): Basic Service Symbols - General InformationHyundai Santa Fe (DM): Basic Service Symbols

Basic Service Symbols

There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service.
Symbol
Meaning

Do not reuse the part. Replace a new one.

Apply engine oil or transmission oil to the part.

Apply automatic transmission fluid (ATF) to the part.

Apply grease to the part.

Apply sealant to the part.


General Tightening Torque Table
General Tightening Torque Table Bolt nominal diameter (mm) Pitch (mm) Torque Nm (kg.cm, lb.ft) Head Mark 4 Head Mark 7 M5 0.8 3 ~ 4 (30 ~ 40, 2.2 ~ 2.9) 5 ~ 6 (50 ~ 60, 3.6 ~ 4.3) M6 1.0 5 ~ 6 (50 ~ 50, ...

General Service Information
General Service Information Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work. The support rod must be inserted into the hole near the edge of the hood ...

See also:

Interior lamp bulb replacement
WARNING Prior to working on the Interior Lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry ...

Muffler. Components and Components Location
Components 1.  Front muffler 2.  Catalytic converter 3. Center muffler 4. Main muffler ...

Spark Plug. Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the spark plug is normal. ...