Hyundai Santa Fe (DM): Battery Sensor. Repair procedures
Removal
1. |
Disconnect the battery negative (-) cable.
|
2. |
Disconnect the battery sensor connector (A).
|
3. |
Remove the battery negative (-) cable after removing the bolts
(B).
|
Installation
1. |
Install in the reverse order of removal.
|
Battery Sensor. Description and Operation
Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as ...Starting System
...See also:
Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. If your vehicle is equipped with the theft alarm system, the interior lights automatically turn ...
Starter Relay. Repair procedures
Inspection 1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3. Remove the starter relay(A). 4. Using an ohmmeter, check that there is continuity between each terminal. Terminal ...
Smart Key. Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do ...