Hyundai Santa Fe: Body Electrical System
Seat belt warning (for driver’s seat) Oil Level Gauge & Pipe. Repair procedures Crach Pad Center Panel. Components and Components Location
Replacement [Second row seat belt buckle] • Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B). 1. Place the second ...
Rear Seat Belt Buckle. Repair proceduresSee also:
The driver's seat belt warning light and chime will activate to the following table when the ignition switch is in "ON" position. *1Warning pattern repeats 11 times with an interval of 24 ...
Removal and Installation 1. Remove the oil gauge(A). 2. Remove the intake manofold. 3. Remove the oil level pipe(A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 4. Install in ...
Component Location 1. Crash pad center lower panel ...
