Hyundai Santa Fe (DM): Camshaft Position Sensor (CMPS). Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
position of each cylinder which the CKPS can't detect.
The CMPS is installed on engine head cover and uses a target wheel installed
on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the
target wheel passes the Hall sensor, the magnetic field changes in the sensor.
The sensor then switches a signal which creates a square wave.
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. ...
Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form ...
See also:
Battery. Repair procedures
Removal 1. Disconnect the battery (-) terminal and (+) terminal (A). 2. Remove the battery mounting bracket (B) and the insulation pad and then remove the battery (C). 3. Remove the air cleaner. <a ...
Armed stage
Using the smart key (if equipped) Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors, the engine hood and tailgate lid are closed ...
Battery recharging
Your vehicle has a maintenance-free, calcium-based battery. If the battery becomes discharged in a short time (because, for example, the headlights or interior lights were left on while the vehicle was ...
