Hyundai Santa Fe (DM): Charging System
- Description and Operation
- Repair procedures
- Alternator. Description and Operation
- Alternator. Specifications
- Alternator. Components and Components Location
- Alternator. Schematic Diagrams
- Alternator. Repair procedures
- Battery. Description and Operation
- Battery. Specifications
- Battery. Components and Components Location
- Battery. Repair procedures
- Battery. Troubleshooting
- Battery Sensor. Description and Operation
- Battery Sensor. Repair procedures
Spark Plug. Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the spark plug is normal. ...Description and Operation
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC current ...See also:
Alternator. Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C). 3. ...
Transaxle Oil Temperature Sensor. Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
Theft-alarm system
This system is designed to provide protection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the "Armed" stage, the second is the "Theft-alarm" ...